| PRE-SOAK | Select "Pre-Soak" and soap vehicle down from bottom to top for 30 seconds to remove loose dirt. |
| CLEAN/DEGREASE TIRES | Select "Tire Cleaner" to apply low pressure, holding gun about 1" from tires for best results. |
| WASH | Select "Soap" and go back to where you started, washing from the bottom up. Hold the gun 6"-8" from the vehicle. |
| FOAM BRUSH | Select "Foam Brush" and scrub entire vehicle thoroughly. Return brush to holder. |
| RINSE | Select "Rinse" and apply high pressure water, rinsing the vehicle from top to bottom. Total time 4-8 minutes. |
| WAX (optional) | Select "Wax" and apply high pressure spray wax, waxing from top to bottom. |
| SPOT-FREE RINSE | Select "Spot Free" rinse and apply from top to bottom, paying special attention to windows, side view mirrors and chrome. Approximately 1-2 minutes. |
You do not have to follow ALL seven steps. You may choose to simply wash, rinse and spot free your vehicle if that's what you prefer.
On newly HMA-waxed vehicles, you may want to just rinse and spot free rinse it!
Additional Helpful Hints
Start with the dial set in the "WASH" position and spend 30 seconds going once around the vehicle, in a bottom to top fashion, to get soap working on the dirt. This 30-second "once over" with soap helps loosen up the dirt for easier cleaning.
Then, go back to where you started and begin to really wash the vehicle, using the Bubble Brush or the high-pressure gun at a distance of 3" to 8" from the surface.
End up, using the Spot Free Rinse for the last minute or two to reduce spotting as the vehicle dries.
